Sign In

Workshop Tools

Digital Caliper 4
Digital Caliper 4
This digital caliper is the perfect size for the locksmith. It is well made and accurate.
16/- OMR
F-12 Piece Needle File Set
F-12 Piece Needle File Set
These well made needle files are a nice addition to any locksmith's tool box. Each file has a nylon handle and some in a plastic case. Each file is 6-1/4" in length.
14/- OMR
F-6 Piece Key File Set
F-6 Piece Key File Set



This handy key file set consists of six American Pattern file shapes: square, half-round, three-square, round, flat, and warding. File cut lengths are approximately 4" (10 cm) with an overall length of 7"(17 cm). Each file has a smooth wooden handle and the set comes in a hanging pouch.

16/- OMR
F-Complete Locksmith's File Set
F-Complete Locksmith's File Set
This high quality file set was designed specifially for the locksmith in mind.includes the following:
1.Swiss Made - 6" Pippin File (2-Cut) ... This is the most popular file we offer.
2.Swiss Made - 6" Pippin File (4-Cut)
3.Swiss Made - 6" Round File (2-Cut)
4.Swiss Made - 6" Round File (4-Cut)
5.6" Warding File (Fine Cut)
6.6" Warding File (Medium Cut)
7.4" Warding File (Fine Cut)
8.4" Warding File (Medium Cut)
9.Special Lock Pin Tip Tweezer
90/- OMR
K-LAB Annex
K-LAB Annex
The LAB Interchangeable Core Annex® offers the simplest method for the loading and unloading of Interchangeable Core Pins, Springs and caps, using only one instrument for both functions.
A second time saving feature is a Slide out Code Book below the area where the core is slid in place. This allows the user to unload the core pins, springs, and caps into a confined area without spilling the parts in or around the work area.

The Slide out Code Book is also used to decode the Core to determine the bitting of the control key when it is not available and also determine the top master key bitting.
135/- OMR
K-Lock Rekeying Tool Kit
K-Lock Rekeying Tool Kit


A perfect selection of tools for the new or apprentice locksmith who wants to learn how to re-key.

Kit includes:


No. PTT-4 Pin Tumbler Tweezers

No. TPT-5 Pin Tumbler Tweezers with push rod

No. SUT-14 Hollow Brass Follower Set

No. CPH-10 Solid Plug Holder

No. SCS-25 Cylinder Shims

No. HT-RKC1 How To Re-Key Cylinders (CD)
62/- OMR
K-Master Keying Professional Kit
K-Master Keying Professional Kit


This is the kit that will add that professional edge to all of your master keying. Make an impression by custom stamping your customers' keys. MasterKing®the world-class master keying software, guides you through the development of simple or complex systems. Instantly displays Change Keys, Block Masters, Row Masters and much, much more.

Kit includes:


No. HCF-3/32 Stamps (Figures)
No. HCL-3/32 Stamps (Letters)

No. SA-7XL Stamp Aligner™ XL

No. MK-CD MasterKing® (CD)

No. HT-CMK1 How To Create Master Key Systems (CD)
255/- OMR
K-Plug Holder
K-Plug Holder
The CPH-10 is made of hardened bar stock and holds many popular plugs; including: Arrow, Corbin, Kwikset, Lockwood, Sargent, Schlage, Weiser and Yale.
8/- OMR
S-Letters Only 1/8
S-Letters Only 1/8
High quality, U.S. Made Letter Number Set. Unlike other this stamp set comes complete with a wooden block case/holder for easy selection and picking.
27/- OMR
S-Letters Only 3/32
S-Letters Only 3/32
High quality U.S. Made Letter Number Set. Unlike other this stamp set comes complete with a wooden block case/holder for easy selection and picking.
27/- OMR
S-Number Stamp Set 1/8
S-Number Stamp Set 1/8
High quality figure set. Made in the USA.
22/- OMR
S-Number Stamp Set 3/32
S-Number Stamp Set 3/32
High quality Figure Number Set. Made in the USA.
22/- OMR
S-Stamp Aligner
S-Stamp Aligner
The Stamp Aligner™ solves the problems locksmiths have always had while stamping numbers on keys. Crooked numbers, stamps flying across the room, and numbers that go up, down, and all around are now things of the past. The Stamp Aligner™ holds the stamps so that figures may be stamped on keys in a straight line with even spacing between characters. The Stamp Aligner™ has 7 detents to stamp up to 7 characters and 3 rows evenly on a standard key.
A key is placed onto the bottom part of the Stamp Aligner™ and secured in place. The top part of the Stamp Aligner™ is moved into one of the spacing indexes. The stamp is placed into the square hole, over the spot where the key is to be stamped. The stamp is held securely in place for it to be struck by a hammer. Spacing is clearly defined by a spring-loaded detent built into the device. Each character stamped on the key will be straight, spaced evenly, and aligned perfectly. When the stamps are all struck with the same force, the result is a key that looks like it was factory stamped. Letter and Figure Stamps are sold separately.

No. SA-7
Stamp Aligner™
.25" (6.35mm) square hole fits
1/8" (3mm) and 3/32" (2.5mm) character stamps.

110/- OMR
S-Stamp Aligner XL
S-Stamp Aligner XL
The Stamp Aligner™ XL . Often after a key is cut, an identifying number is stamped on it. For many locksmiths stamping the key resulted in crooked numbers, stamps flying across the room, and a key that did not reflect their professionalism.With the Stamp Aligner™ XL, two keys are held securely on the Universal Stamping Plate and the stamps are held in the Index Block. The result being evenly spaced, perfectly aligned characters on the key. The Universal Plate is easily removed, revealing two openings designed to hold rim or mortise cylinders so they can be stamped as well. Additional specialty plates are available for quick "snap-in" locking of standard Schlage keys and Best IC keys and cores for even faster stamping.Whether stamping a name on one key or codes on multiple keys and cylinders in a master key system, you will find that the Stamp Aligner™ XL provides for a professional looking stamped key, and an essential complement to your lock shop.
138/- OMR
S-Stamp Aligner XL (I-Core)
S-Stamp Aligner XL (I-Core)
SA-7XL-ICB (with Best IC Plate)
Stamp Aligner™ XL (Best IC) comes with the Universal Stamping Plate and a special Best IC Stamping Plate that holds Interchangeable cores and standard Best keys.



Often after a key is cut, an identifying number is stamped on it. For many locksmiths stamping the key resulted in crooked numbers, stamps flying across the room, and a key that did not reflect their professionalism.With the Stamp Aligner™ XL, two keys are held securely on the Universal Stamping Plate and the stamps are held in the Index Block. The result being evenly spaced, perfectly aligned characters on the key. The Universal Plate is easily removed, revealing two openings designed to hold rim or mortise cylinders so they can be stamped as well. Additional specialty plates are available for quick "snap-in" locking of standard Schlage keys and Best IC keys and cores for even faster stamping.Whether stamping a name on one key or codes on multiple keys and cylinders in a master key system, you will find that the Stamp Aligner™ XL provides for a professional looking stamped key, and an essential complement to your lock shop.
163/- OMR
Pages: [1]  2